background image

Reference 

Information

This section provides the specifications, part numbers, and accessories, and mounting 
instructions for the FOX USB Extender. Topics that are covered include:

• 

Specifications

• 

Part Numbers

• 

Mounting the FOX USB Extender

Specifications

 USB

USB standards ................................   USB 2.0, USB 1.1, USB

 

1.0 compatible

USB data rates ................................   Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
Signal transmission distance ...........   30 km (18.64 miles) with singlemode (SM) cables 

300 m (985') with 62.5 µm OM1 multimode (MM) cables 
1 km (3280') with 50 µm OM2 multimode (MM) cables 
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized 
multimode cables

NOTE:

  Operating distance is approximate. These are typical maximum distances that may vary depending on 

factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, 
environmental factors, and kinks.

 USB host 

 FOX USB Extender Tx

Number/signal type ........................   1 USB (supports USB 2.0, 1.1, 1.0 speeds)
Connectors ....................................   1 female USB type B

 Interconnection between transmitter and receiver

Connectors ....................................   2 LC

 

connectors

Nominal peak wavelength ..............   850 nm for MM, 1310 nm for SM
Data rate ........................................   600 Mbps
Transmission power ........................   -5 dBm, typical
Maximum receiver sensitivity

Singlemode .............................   -18 dBm, typical
Multimode ...............................   -12 dBm, typical

Optical loss budget

Singlemode .............................   13 dB, maximum
Multimode ...............................   7 dB, maximum

 USB hub 

 FOX USB Extender Rx

Number/signal type ........................   (1) 4-port USB hub
Connectors ....................................   4 female USB type A

9

FOX USB Extender • Reference Information

Summary of Contents for FOX USB Rx (MM)




















Reviews: