Extender Series • Installation
13
Mounting
Mounting the Extender AAP or Extender AAP EX into an AAP Wallplate or
Device Faceplate
The Extender AAP or Extender AAP EX and any other adapter plates must be attached to a
device faceplate or AAP wallplate and cabled before the device or wallplate is pretested or
installed in a wall or furniture.
1.
Before any user-supplied cables are attached, insert
the output BNC connectors and wires of the
Extender AAP or Extender AAP EX through the
opening in the front of the wallplate or device
faceplate, as shown at right.
ATTENTION:
Be careful not to damage
connectors while placing the Extender
through the opening.
2.
Insert the threaded standoffs of the AAP
through the holes in the device faceplate
or AAP wallplate.
3.
Using the provided #4-40 nuts and captive washers, secure the Extender to the
faceplate or wallplate.
Ext
ron
AAP
102
EX
TE
NDE
R
COMPUT
ER IN
AU
DIO IN
RGB - 20"
HV - 18"
Connects to
AAP Cable
Front
Panel
Extron
HSA 822
Two Screws
Each Side
#4-40 Nut
w/ Captive
Washer
Installation Cable
Cable
Clamp
Screws or
Nails
Wall Stud
Extron
Extender AAP
Extron
AAP 102
#4-40 Nut w/
Captive
Washer
HSA 822
Cable
Extron
Extender AAP EX
CO
MPUT
ER IN
AUDI
O IN
Figure 6.
Left: Mounting the Extender AAP or Extender AAP EX to a Device or Wallplate
Right: Mounting the Extender AAP EX to an HSA Faceplate
4.
Repeat steps 1, 2, and 3 to mount other AAPs. Cover any openings in the faceplate
with blank plates (provided).
5.
Be sure to include the AAP connectors as part of the installation pretest before final
installation of the faceplate.
For more detailed installation information, see the installation guide shipped with the
faceplate or the HSA.
Ext
ron
AAP 102
AAP 102
Rotate to avoid
breaking the
power connector
on the bottom
board.
EX
TENDE
R
COM
PU
TE
R IN
AU
DIO
IN
Summary of Contents for Extender AAP
Page 6: ......