Extron electronics EDID 101H 4K PLUS, User Manual

Page: 31 / 35

Updating the Firmware
Firmware updates are released periodically on the Extron website. You can find the version
currently loaded on your device using SIS commands (see
Command and Response
Table for SIS Commands on page 18). Compare this with the latest release for the
EDID 101H 4K PLUS on the Extron website and decide whether to update your firmware.
TIP:
Read the Release Notes provided on the website with the latest firmware to
determine whether you need the latest version.
This section describes how to update firmware for the EDID 101H 4K PLUS including:
• Download and Install Firmware Loader
• Downloading EDID 101H 4K PLUS Firmware
• Loading EDID 101H 4K PLUS Firmware
Download and Install Firmware Loader
Use the Extron Firmware Loader utility to update the firmware on Extron products. If you do
not already have Firmware Loader installed on your computer, download it as follows:
1.
Go to the Extron website at
www.extron.com
.
2. In the Search field, enter Firmware Loader and press < Enter > (see figure 18,
1
)
The Firmware Loader page opens.
1
2
Figure 17. Firmware Loader Download Link
3.
Click Download (
2
).
4. Follow the instructions on the remainder of the download screens to save the
executable
Firmware Loader installer file to your computer. Note the folder to
which the file was saved. By default this is C:\\users\<user name>\Downloads.
5. In your file browser, locate the downloaded executable installer file and double-click it to
launch the installer.
6. Follow the instructions on the Installation Wizard dialog boxes to install Firmware
Loader on your computer. Unless you specify otherwise, the installer program places
the Firmware Loader File,
FWLoader.exe , at c:\Program Files\Extron\
FWLoader .
Updating the
Firmware
EDID 101H 4K PLUS • Reference Information 23