DXP HD 4K PLUS Series • Internal Web Page
67
Output Status Panel
The
Output Status
panel (see
, on the previous page) displays information
about the connected outputs. The number of outputs displayed depends on the number of
outputs available on the DXP HD 4K Series model. Each output is identified by a number in
the left column. For each output, the following information is displayed:
Output name
— Displays the name of the output.
Output format
— Displays the format of the output.
HDCP compliance
— Displays the HDCP compliance status of each output (see the table
below for symbol definitions).
Symbol
Definition
The display is HDCP compliant. Either:
•
The display is connected and supports HDCP but is not currently
encrypted, or
•
The display is connected, supports HDCP, and is currently encrypted.
The display is not HDCP compliant.
-
Unable to determine the HDCP status.
No Display
There is no display detected.
Communication Settings Panel
The
Communication Settings
) enables you to configure TCP/IP
settings and displays RS-232 settings (the RS-232 settings cannot be edited).
To configure the TCP/IP settings, click the
Edit
button in the
Communication Settings
panel. The
Communication
Settings
dialog box opens.
Figure 44.
Communication Settings Dialog Box
NOTE:
The hostname is generated from the device name. To change it, see
