DXP HD 4K Series • SIS Configuration and Control
76
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
Device Commands
Verbose mode
Set verbose mode
EX2#
CV
}
Vrb
X2#]
Enable or disable verbose mode
and tagged responses, where
additional information is provided
in response to a query.
View verbose mode
E
CV
}
X2#]
View the verbose mode.
Reset mode
Reset flash memory
24
E
ZFFF
}
Zpf
]
Clear the flash memory.
Reset all device settings to
factory default
24
E
ZXXX
}
Zpx
]
Reset all device settings to factory
default.
Absolute system reset
24
E
ZQQQ
}
Zpq
]
Reset all device settings, including
DHCP (off) and IP settings (IP
address: 192.168.254.254).
Reset all device settings and
delete files
24
E
ZY
}
Zpy
]
Reset all device settings, excluding
IP settings.
Reset mutes
E
ZZ
}
Zpz
]
Unmute all muted outputs.
Power save mode
NOTE:
Among other power savings, in power save modes 1 and 2 (
X2$
=
1
or
2
), cooling fans shut down
completely (16x16 and 16x8 matrix sizes) or partially (8x8, 8x4, and 4x4 matrix sizes).
Set power save mode 1
E
1PSAV
}
Psav1
]
Turn off all functions except IP,
USB, and RS-232 ports.
NOTE:
The switcher returns to normal mode (
X2$
=
0
) when you use the front panel, issue the
E
0PSAV
}
command, connect via PCS, or cycle power.
Set power save mode 2
E
2PSAV
}
Psav2
]
Turn off all functions except
IP, USB, and RS-232 ports.
Front panel is non-responsive.
Responds to
E
0PSAV
}
commands.
NOTE:
The switcher returns to normal mode (
X2$
=
0
) only when you issue the
E
0PSAV
}
command,
connect via PCS, or cycle power.
Set power save mode 0
E
0PSAV
}
Psav0
]
Set to normal operation (default).
View power save mode
E
PSAV
}
X2$]
NOTES:
X2#
= Verbose mode
0
= clear or none (default for Telnet connections)
1
= verbose mode (default for RS-232 and USB connections)
2
= tagged responses for queries
3
= verbose mode and tagged queries
X2$
= Power save mode
0
= normal operation (
default
)
1
= limited functionality (see
2
= limited functionality (see