Extron electronics DTP2 T 201 D, User Manual

Page: 15 / 35

DTP2 T 201 D Transmitter • Installation and Operation 7
Final Installation
After testing and making any adjustments, do the following:
1. At the power outlet, unplug the power supply.
NOTE : One power supply can power both the transmitter and compatible receiver
(see Transmitter Rear and Bottom Panels below).
2. Mount the transmitter into the wall box or mud ring, and attach the supplied decorator
style faceplate to the unit (see
figure 3 on page 5).
3. At the power outlet, reconnect the power supply. This powers up both units if the
compatible receiver is connected.
Transmitter Front Panel
HDMI IN
LINK
a
DTP2 T 201 D
Front Panel
A
Figure 5. DTP2 T 201 D Transmitter Front Panel
A
HDMI input
— Connect an HDMI cable between this port and the HDMI output port (or
DVI port, with an appropriate adapter) of the digital video source.
Transmitter Rear and Bottom Panels
OUT
DTP2 T 201 D
OFF
SEND
POWER
PO
WE
R 12V --A MA
X
HDBT
DTP
CONFIG
DTP2 T 201 D
Rear Panel
Top View
B
A
E
C
D
DTP2 T 201 D
Bottom View
F
Figure 6. DTP2 T 201 D Transmitter Rear and Bottom Panels
5
6