DTP2 R 212 Series • Internal Web Page
55
2.
Edit the
Device
Name
as desired.
3.
When finished editing, click
SAVE
to confirm the changes or
CANCEL
to close the
window without making changes. Clicking the
X
in the upper‑right corner of the screen
also closes the window without saving the changes.
Device Status Panel
The
Device
Status
panel displays the current date, time, time zone, the amount of time
the device has been running (
Uptime
), and the internal temperature in degrees Celsius.
To set the date and time:
1.
Click
EDIT
(see figure 39 [left],
1
) in the
Device
Status
panel. The
Device
Status
Settings
panel opens to allow edits (right).
Figure 39.
Device Status Panel
2.
Edit the
Date/Time
and
Timezone
as desired.
3.
When finished editing, click
SAVE
to confirm changes or
CANCEL
to close the window
without making changes. Clicking the
X
in the upper‑right corner of the screen also
closes the window without saving the changes.
4.
Alternatively, click
Sync
to
PC
(
2
) to set the date and time according to the PC.
Network Settings Panel
In the
Network
Settings
panel, set the IP address,
subnet mask, and gateway
address for the switcher, and
turn DHCP
On
and
Off
.
To set the IP addresses:
1.
Click
EDIT
[left],
1
) in the
Network
Settings
panel. The
Network
Settings
panel
opens to allow edits
(right).
Figure 40.
Network Settings Panel
39
40
Summary of Contents for DTP2 R 212 Series
Page 2: ...Safety Instructions...
Page 6: ......
