Extron DTP T HWP D and DTP T UWP D Series • Remote Control
19
Symbol definitions
DTP T HWP 232/332 D and DTP UWP 232/332 D models
]
= Carriage return/line feed
}
= Carriage return (no line feed)
|
= Pipe (can be used interchangeably with the
}
character)
•
= Space
E
= Escape key
W
= Can be used interchangeably with the
E
character
X!
= Input number
0
through
2
(
0
= deselect input [break tie]. This results in the output being disabled.)
1
= HDMI,
2
= HDMI 2 (HWP models), VGA (UWP models)
X@
= Status
0
= off, disabled, or not detected
1
= on, enabled, or detected
X#
= Auto switch mode
0
= disabled (
default
)
1
= enabled (highest active input has priority)
X$
= EDID
X%
= Input HDCP status
0
= No source is detected
1
= Source is detected with HDCP
2
= Source detected without HDCP
X^
= Output HDCP status
0
= No sink is detected
1
= Sink is detected with HDCP support
2
= Sink is detected without HDCP support
X&
= Transmitter name
A text string of up to 24 alphanumeric characters and minus sign or hyphen (-).
No blank or space characters are permitted as part of a name. The first character must
be a letter, and the last character must not be a minus sign or hyphen (
default
is
DTP-T-HWP/UWP-232/332
).
X*
= Raw EDID data
128 or 256 bytes of hexadecimal data
X(
= Video color bit depth mode
0
= Auto (
default
, based on sink EDID)
1
= force 8-bit
X1!
= Current EDID native resolutions and refresh rate in plain text
X1&
= Verbose mode
0
= clear/none
1
= verbose mode (
default
)
2
= tagged responses for queries
3
= verbose mode and tagged for queries
X2)
= Input audio format
0
= embedded digital audio
1
= analog audio input
2
= auto select (embedded digital audio takes priority)
X3)
= Pixel phase value
0
to
63
,
default
is
32
X3!
= Total pixels value
±
255
of default value (depends on input rate)
X3@
= Horizontal and Vertical start value
0
to
255
(
default
is
128
)
