DTP HDMI 4K D Series Transmitter and Receiver • Installation and Operation
14
Operation
INPUTS
AUDIO
Tx Rx G Tx Rx
RS-232
IR
OVER DTP
OUTPUTS
AUDIO
Tx Rx G Tx Rx
RS-232
IR
OVER DTP
DTP HDMI 4K D Series Tx Front Panel
DTP HDMI 4K D Series Rx Front Panel
B
A
Figure 12.
DTP HDMI 4K D Transmitter and Receiver Power Indicators
NOTE:
Both transmitter and receiver have power indicators in the locations shown.
Transmitter Power Indicator
A
Power LED
— This two-color front panel LED lights to indicate signal and power status
as follows:
•
Amber
— The unit is receiving power but no signal on the HDMI input.
•
Green
— The unit is receiving power and a signal is present on the HDMI input.
Receiver Power Indicator
B
Power LED
— This two-color front panel LED lights to indicate signal and power status
as follows:
•
Amber
— The unit is receiving power but no signal on the TP input.
•
Green
— The unit is receiving power and a signal is present on the TP input.
System Operation
After the transmitter, the receiver, and their connected devices are powered up, the system
is fully operational. If any problems are encountered, ensure that all cables are routed and
connected properly.
NOTE:
Ensure that the video source and display are properly connected to the
transmitter and receiver pair, and that the transmitter, the receiver, and the display
have power applied before power is applied to the video source. If all other devices
are not turned on before the video source, the image may not appear.
