DTP CrossPoint 84 • Front Panel Operations
15
Basic
functions consist of:
•
Making ties
•
Recalling presets
•
Setting audio volume
•
Changing Lock modes
Advanced
functions consist of:
•
Setting audio output mutes
•
Setting front panel configuration
The switcher is shipped from the factory in Lock mode 2.
Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 0
NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The
Esc
,
Video
, and
Audio
buttons blink twice.
•
If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the
switcher). The
Video
and
Audio
buttons blink twice.
Toggle the lock on or off by pressing and holding the
Enter
,
Video
, and
Audio
buttons
simultaneously until the buttons blink (approximately 2 seconds).
Lock mode 2
Lock mode 0
CONTROL
I/O
AUDIO
VIDEO
I/O
AUDIO
VIDEO
ENTER
PRESET
VIEW
ESC
CONTROL
I/O
AUDIO
VIDEO
ENTER
PRESET
VIEW
ESC
CONTROL
I/O
AUDIO
VIDEO
ENTER
PRESET
VIEW
ESC
Press and
hold
for 2 seconds.
Press and
hold
for 2 seconds.
Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 1
NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The
Esc
,
Video
,
and
Audio
buttons blink twice.
•
If the switcher is in Lock mode 2, this procedure selects mode 1. The
Video
and
Audio
butto
ns blink twice.
Toggle the lock on and off by pressing and holding the
Video
button and the
Audio
button
simultaneously for approximately 2 seconds.
Lock mode 1
Lock mode 2
I/O
AUDIO
VIDEO
I/O
AUDIO
VIDEO
CONTROL
I/O
AUDIO
VIDEO
ENTER
PRESET
VIEW
ESC
I/O
AUDIO
VIDEO
Press and
hold
for 2 seconds.
Press and
hold
for 2 seconds.
