DSC HD-HD 4K A • Setup Guide (Continued)
2
Front Panel Overview
DSC HD-HD 4K A
AUTO-
IMAGE
INPUT
OUTPUT
SIGNAL
HDCP
AUDIO
SIGNAL
HDCP
AUDIO
MENU
ENTER
HOLD FOR XGA/720p
CONFIG
A
A B
B
E
E
D
D
C
C
F
F
A
Status LED (power and signal)
D
Output status LEDs
B
USB Config port
E
Menu
and
Enter
buttons
C
Input status LEDs
F
Navigation buttons
Figure 2.
DSC HD-HD 4K A Front Panel
A
Status LED
— This bi-color LED lights amber when the unit is powered on but no signal is present, blinks amber every
3 seconds when the unit is in power save mode, and lights green when both power and an input video signal are present.
B
USB configuration port
— Connect a host to this USB mini-B port for device configuration, control, or firmware updates.
C
Input LEDs
— Light to indicate the following:
•
Signal
— An input signal is present.
•
HDCP
— The input signal is encrypted with HDCP.
•
Audio
— An embedded digital audio signal is present on the input.
D
Output LEDs
— Light to indicate the following:
•
Signal
— HDMI video is being output. If the video is muted, this LED does not light.
•
HDCP
— The output signal is encrypted with HDCP.
•
Audio
— An embedded digital audio signal is present on the output.
E
Menu and Enter buttons
— Let you access the on-screen display (OSD) and make selections from the submenus.
F
Navigation buttons
(right
, left
, up
, and down
arrow buttons) — Let you navigate through the OSD submenus,
lock the front panel (see the next section), perform Auto-Image™ (press
), and reset the output rate (hold
for 5 seconds).
Configuring the DSC HD-HD 4K A
The DSC HD-HD 4K A can be configured through a host connected to the RS-232, USB, or LAN port using Extron Product
Configuration Software (available at no charge at
www.extron.com
), SIS commands (see page 4 for a selection of
basic
commands
), or the web page (see the
DSC HD-HD 4K A Series User Guide
, available at
www.extron.com
to access this page).
You can also configure the scaler using the OSD menu system.
OSD Menu System
The on-screen display (OSD) menu system consists of seven submenus
and one information screen. To access the menus, press the front panel
Menu
button. With the main menu displayed, use the arrow buttons
to step through the submenus and submenu items. Press the
Enter
button to select highlighted items. The
Device
Info
screen is read-only
and does not provide selections.
•
Quick
Setup
•
Audio
•
Picture Controls
•
Advanced
•
Input
•
Communications
•
Output
•
Device
Info
NOTE:
The OSD times out and closes after 1 minute if no buttons
are pressed.