DMP 64 Plus • Internal Web Pages
84
Advanced
The
Advanced
tab allows the user to make changes to line re-registration, RTP port range,
and outgoing calls (see figure 60).
Figure 60.
VoIP Network Advanced Tab
1
Registration
— Click the
Automatic Line Re-registration
checkbox to enable or
disable automatic line re-registration. If enabled, use
Retry Count
and
Retry Delay
drop-down lists to set the necessary values. Click
Apply
to save changes.
2
RTP Port Range
— Use the
Start Port
and
End Port
drop-down lists to set the
necessary values. The valid port range is
1024-65534
.
NOTES:
•
Changes to the
RTP Port Range
settings will take effect immediately whether
using direct input or the stepper buttons.
•
The
Start Port
value must be lower than the
End Port
value.
•
The
Set Defaults
button sets the
Start Port
to
50000
and the
End Port
to
50999
.
3
Outgoing Calls
— Disabled by default. If required, click the checkbox to enable codec
compatibility mode.
60
