manualshive.com logo in svg

Extron electronics DA 2HD 4K PLUS, User Manual, Page: 26 / 42

Share
Download
Extron electronics DA 2HD 4K PLUS User Manual Download Page 26

Using PCS Software

1. 

Ensure that PCS is installed on the control PC.
The program can be downloaded, free of charge, from the 

Extron website

.

2. 

Connect a control PC to the DA HD 4K PLUS distribution amplifier. The 

Windows‑based PCS communicates with the switcher via the Front Panel 
Configuration port with a standard USB mini‑B port.

3. 

Open the PCS software on the control PC from the 

PCS

 icon loaded on the desktop 

(optional, see image on the right) or from the 

Start

 menu:

Start

 > 

Programs

 > 

Extron

 

Electronics

 > 

Extron

 

Product

 

Configuration

 

Software

 > 

Extron

 

Product

 

Configuration

 

Software

The 

Product

 

Configuration

 

Software

 opens to the 

Device

 

Discovery

 screen.

1

2

DA4 HD 4K PLUS

Figure 10. 

PCS Device Discovery Screen

4. 

Select the DA HD 4K PLUS distribution amplifier by clicking on it to highlight it in the 

list (see figure 10, 

1

).

5. 

Click 

Connect

 (

2

).

The 

Product

 

Configuration

 

Software

 opens to the device main menu.

figure 10 

 

DA HD 4K PLUS Series • Configuration Software

18

Summary of Contents for DA 2HD 4K PLUS











































Reviews:

No comments