P/2 DA2 WM/EC
Appendix
P/2 DA2 WM/EC Appendix
A-3
Audio input
Number/signal type ................... 1 stereo, unbalanced
Connectors .................................... 1 3.5 mm female stereo jack, 2 channel; tip
(L), ring (R), sleeve (GND)
Impedance .................................... 50 ohms, unbalanced
Audio throughput
Gain ............................................... Unbalanced 0dB, ba6dB
Frequency response ..................... ±0.05dB @ 20 Hz to 20 kHz
S/N ................................................ >90 kHz, output 21dB, balanced
Audio output
Number/signal type ................... 1 stereo, balanced/unbalanced
Connectors .................................... 1 3.5 mm captive screw terminal, 5 pole
Impedance .................................... 50 ohms unbalanced; 100 ohms balanced
General
Power............................................. 12 to 24VAC or VDC, 0.5A, 5 watts,
external
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
........................................................ Ope32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount................................... No, but wall- or furniture-mountable
Enclosure type ..............................Metal
Enclosure dimensions
P/2 DA2 WM ................... Plate.. 4.50" H x 4.60" W (11.43 cm H x 11.68 cm W)
P/2 DA2 WM AAP .......... Plate.. 4.50" H x 8.20" W (11.43 cm H x 20.83 cm W)
P/2 DA2 WM EC .............. Plate.. 3.12" H x 3.94" W (7.92 cm H x 10.01 cm W)
P/2 DA2 WM EC AAP .... Plate.. 3.15" H x 7.69" W (8.00 cm H x 19.53 cm W)
All models......................... Box ... 3.00" H x 3.50" W x 1.60" D (7.62 cm H x
8.89 cm W x 4.06 cm D)
Shipping weight ........................... 2 lbs (0.9 kg)
Vibration ....................................... NSTA 1A in carton (National Safe Transit
Association)
Approvals ..................................... UL, CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.
P/2 DA2 WM/EC Specifications
Video input
Number/signal type ................... 1 VGA/SVGA/XGA/SXGA RGBHV,
RGBS, RGsB, RsGsBs
Connectors .................................... 1 15-pin HD male
Nominal level(s) .......................... Analog ....... 0.7V p-p
Minimum/maximum level(s) .... Analog ....... 0.4V to 2.0V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. Autoscan 15 kHz to 135 kHz
Vertical frequency ....................... Autoscan 30 Hz to 170 Hz
Return loss .................................... -38.3dB @ 5 MHz
Maximum DC offset .................... 200mV
Video throughput
Gain ............................................... Unity, (0.1V) 15% peaking, (0.2V) 30%
peaking
Bandwidth .................................... 300 MHz (-3dB), fully loaded
Video output
Number/signal type ................... 2 VGA/SVGA/XGA/SXGA RGBHV,
RGBS, RGsB, RsGsBs
Connectors .................................... 2 15-pin HD female (1 display, 1 local
monitor)
Nominal level ............................... Unity (1x input level)
Impedance .................................... 75 ohms
Return loss .................................... -41dB @ 5 MHz
DC offset ....................................... ±5mV maximum
Sync
Input type ..................................... Autodetect RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. Autodetect RGBHV, RGBS, RGsB, RsGsBs
Input level ..................................... 3.0V to 5.0V p-p
Output level .................................. TTL ............. 5.0V p-p
Input impedance .......................... 510 ohms
Output impedance ....................... 75 ohms
Max. propagation delay .............. 18.8 nS
Max. rise/fall time ....................... 4 nS
Polarity .......................................... Positive or negative (follows input)
A-2
Appendix