Extremis ROMEO & JULIET, Assembly Instructions Manual

Page: 6 / 52

+/- 30 min.
2. Position the first bench on the desired spot and, if
necessary, anchor it to the ground.
KEEP IN MIND
that when the benches are connected, it is quite
difficult to move them.
3. Fix the connecting piece onto the side to which you
want to attach the next bench.
1. If necessary, first remove the wood cubes on the side
to which you want to attach the next bench. To this
end, turn over the bench, loosen the screws holding
the wood cubes in place, and remove the wood cubes.
Insert short 5*30 screws into the holes to reattach the
metal L-section to the long wooden strips. Turn over
the bench. Repeat this operation on all benches you
want to connect.
OPTIONAL CONNECTION OF # ROMEO & JULIETS
WHAT YOU NEED
2 x no. 13 spanner
2 people
Torx Tx25 screwdriver
6 assembly connection piece