Extremis MARINA PICNIC, Assembly And Use Manual, Page: 4 / 52

4. Now screw the adjustable feet into the legs. Repeat step
1 through 4 for each table leg assembly and put them
aside. 5. Put the 5/6 tabletop profiles on the floor, with the slots
facing upwards, and make sure that the crosses are
facing the same way. Insert a spacer between each
profile at +/- 40 cm from the end.
2. Slide the bench supports onto the table legs. 3. Slide the bench connections onto the table leg and the
bench support. First push 12 M6 x 16 hexagon socket
bolt shafts through the pre-drilled holes. Make sure
that the bolts are on the outside. Only then thread the
12 lock nuts onto the shafts of the bolts and tighten
them firmly!
1. Insert the table legs into the tabletop connection, aligning the 3 holes, and
use 12 M6x16 hexagon socket bolts and lock nuts to fasten them. First push
all the bolt shafts through the holes and make sure that the bolts are on the
outside. Then thread the nuts onto the shafts of the bolts and tighten them
firmly.
WHAT YOU NEED
no. 3 - 4 hex key
no. 10 - 17 spanner
min. 2 people
+/- 60 min. (depending
on the length of the
table)
ASSEMBLY MARINA PICNIC
4 assembly marina picnic