Extremis Acacia, Manual

Page: 19 / 28

19
stainless steel tube on top of the two base plates
and make sure the holes of the tube match with
the large holes of the second base plate. Mount
the stainless steel tube on it with 3 bolts M6x25.
Attention: Make sure that you fix the bolts in the
thread of the first base plate as shown on the
drawing!
d. parasol base heavy duty.
Place one of the three
galvanised base plates on the ground. Then
position the second base plate on top of it, make
sure the large holes match the smaller holes with
thread of the first base plate. Now you also place
the third base plate on top of the other two plates,
make sure the large holes match the large holes
of the second bae plate. Now place the stainless
steel tube on top of the three base plates and
make sure the holes of the tube match with the
large holes of the upper base plate. Mount the
stainless steel tube on it with 3 bolts M6x35. Let
op: Make sure that you fix the bolts in the thread
of the first base plate as shown on the drawing!
2. Slide the central tube (with crown) in the stainless
steel tube and fix the height adjustment knob at
the height of the middle position as shown on the
drawing. Do not tighten this yet.
3. Put the central tube on the lowest position.
4. Remove the bolt in the crown by the handle as
shown on the drawing.
5. Now mount two set screws each to all baleens as
shown on the drawing. Attention: make sure they
don’t protrude.
6. Mount the baleens in the crown. Attention: make
sure the number of lines of the baleens match
the number of holes on the crown. Fix these
by tightening the set screws as shown on the
drawing.
7. Attach the parasol canopy (random order). Put
your finger in the loop and pull the stainless steel
sail eye over the end of the baleen. Do this for
all the baleens. Attention: de loop of the canopy
must be directed upwards.
8. To put the light on top of the crown, you have to
remove the cover cap first.
9. Now choose your desired height by sliding the
central tube up/down. You can fix the parasol by
tightening the height adjustment knob.
10. You can direct the parasol towards the sun by
loosening the handle.
MAINTENANCE
PU-coated polyester
CLEANING
When dirty
If the whole parasol fabric looks dirty despite
the extreme fabric quality, the ultimate rescue is
machine cleaning your parasol fabric on 60°.
Hang it on the frame to dry.
Do not iron and do not use chlorine bleach or strong
chemical cleaning fluids.
Powder-coating
CLEANING
Regularly
Use Extremis Multicleaner, a 100% biodegradable
detergent or common kitchen cleaning products.
Avoid using aggressive products. These surfaces are
best cleaned with a neutral cleaning product diluted
in water.
REMOVING STAINS
Only if nothing else helps
The magic eraser gets rid of most stubborn stains
without effort. Only if stubborn stains remain visible
after treatment according to the instructions, you
can use the Extremis Magic Eraser sponge. This
sponge is made of melamine resin and wears away
with use. The sponge is very easy to use and gives
results up to 26 times faster than a traditional
microfibre cloth. The magic sponge is the solution
for getting rid of stubborn stains such as felt-tip
pens, grease, scuff marks, limescale marks or coffee
and tea stains. The magic sponge can be used
on tarpaulin fabric, plastic profiles, glass, steel,
chrome, aluminium, porcelain, artificial leather and
many types of floor.
REPAIRING DAMAGED POWDER-COATING
When damaged
The impact of sharp objects can damage the
coating. Scratches or dents can be touched up with
our paint pens. However this only camouflages the
scratches without removing them.
Stainless steel
DAY TO DAY CLEANING
Regularly and after every use
Clean with lukewarm water and a mild detergent or
Extremis Multi Cleaner.
REGULAR CLEANING
When dirty
We advise regular cleaning with Inox Cleaner and
Protector.