ExtremeView Magnum XV 3300, User Manual

Page: 17 / 50

Menu Guide
Setup Satellite
When Selecting Setup Satellite In Install Menu.
1) Degree
Users can edit satellite degree by using
numeric keys on the RCU.
2) LNB Frequency (High / Low)
Input the frequency directly from the numeric
keys on the RCU or press “OK” on the RCU
to scroll frequencies and to select.
3) LNB Power
Select LNB voltage.(13V/18V/Auto)
4) DiSEqC Ver.
DiSEqC must be used when using two or
more antennas and LNBs.
Select none, DiSEqC 1.0 or DiSEqC 1.1.
5) DiSEqC
- Committed
Set The Port Number Of DiSEqC 1.0
Switch ( P-1 To P-4)
- Uncommitted
Set The Port Number Of DiSEqC 1.1
Switch. (P-1 To P-16)
6) 22khz
In case you are using a dual LNB or two antennas connected to a 22khz tone
switch box, make 22khz tone switch enable or disable to select LNB or antenna.
Installation
◈
Service Searching
Setup Motorized System
When Selecting Setup Motorized System In Install Menu.
1) Motorized System 1.2(motor) : You can
move the motor to the left or right by pressing the “
◀
”, “
▶
” keys selection. at v1.2 ,
USALS, off mode.
2) Store : When you press the “ red ” key.
3) Degree : Press OK key on the RCU first, then, press numeric number keys on the RCU to
edit degree directly.
17