Step 3: Secure Side Panels
a. Install one Hold-Down Bracket (#14) on each side
using one flat washer (#16) and one M8 bolt (#15)
for each side.
b. If attaching the side locker or side box, do not use
Hold-Down Bracket on that side.
Hold-Down
Bracket
Flat
Washer
M8 Bolt
Step 4: Install Back Panel
a. Pull MDF board/Stainless Steel Top forward approximately 1/8”
from Back Raised Edge (aka: Fence Rail.)
b. Lift Back Panel into place behind the two side panels. Slide the
bottom edge of the Back Panel between the MDF/Stainless
Steel Top and rear fence rail of roller cabinet. Flange on left and
right sides of back panel should be resting against the inside
back edges of both side panels.
c. Use (6) M5 screws (#11) on each side to fasten the back panel to
side panel assemblies.
Back panel flange should
rest inside the Side
Panel
Slide Back Panel down
behind Side Panels with
bottom of Back Panel fitting
between roller cabinet fence
rail and top work surface.
Back Raised Edge
(aka: Fence Rail)
Back Raised Edge
(aka: Fence Rail)
3