3. Slide the transceiver from the module slot.
4. If the transceiver does not slide easily from the module slot, use a gentle side-to-side rocking
motion while firmly pulling the transceiver from the slot.
5. Attach a dust cover over the fiber-optic bores and store the transceiver in a safe place until
you need it.
Important:
Discard transceivers in accordance with the proper laws and regulations.
AC power supply specifications
This section describes the regulatory AC power specifications for the VSP 4000 4450GSX series
switches.
The following table describes the regulatory AC power specifications for the VSP 4450GSX-PWR+
switch and its TAA compliant version. The regulatory AC power specifications are based on the
maximum rated capacity of the power supplies and are not based on typical power consumption,
which is lower.
Table 1: AC power specifications
4450GSX-PWR+
Input Current:
12A/6A
Input Voltage (rms):
100 to 240VAC at 50 to 60 Hz
Power Consumption:
248 W maximum
Thermal Rating:
508 BTU/Hr maximum
Inrush Current:
70 A maximum
Turn on Condition:
1 second maximum after application of AC power
Important:
12 V output rise time, from 10 to 90 per cent, must be the maximum of 50 ms and monotonic under all
defined input and output conditions.
November 2017
Installation Job Aid for VSP 4450GSX Series
7
