6
Base Frame and Handlebar Assembly
STEP 1- Base Frame
Unpack Base frame from Carton.
Attach (
1L
) Upper Left A- Frame
into (
2L
) Front Left Base Frame
and (
3L
) Right Rear Base Frame.
Repeat for Right Side of Frame.
Connect the Rear Section of the
A-Frame using 2 Bolts (
18
) 2
Washers (
16
), and 2 Nuts (
17
) on
the left and right side.
Attach the Rear Lower Cross Bar
(
5
) into the assembled sections of
the A- Frame using 2 bolts (
15
)
2 Washers (
16
) and # nuts (
17
)
on each side as shown.
Attach the Front Center Cross Bar
(4) to each of the Side A-Frames
using 3 Bolts (15) 3 Washers (16)
and 3 Nuts (17) on each side.
Attached Floor Caps (
14
) to the
completed frame as shown.
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
TIGHTEN ALL BOLTS AT THIS TIME
