Hardware Setup
Summit WM3400 Wireless LAN Controller Installation Guide
28
The country code will need to be set when the controller is rebooted before any Access Points
or Adaptive APs will be adopted.
Verifying the Installation
View the LEDs on the front panel of the Summit WM3400 wireless LAN controller to
ensure the device is functioning properly. The normal LED pattern follows this path:
●
During the Power On Self Test (POST), the System 1 and System 2 LEDs both blink
green.
●
If the POST test fails, the System 1 LED will blink amber. If the POST test succeeds,
the System 1 LED will be lit solid green.
●
As the software is initialized, the System 2 LED will blink green.
●
After the software has finished initializing, the System 1 LED will be lit solid green
and the bottom System 2 LED will be off. The Summit WM3400 wireless LAN
controller is ready to be configured, as described in the
Summit WM3000 Series
Controller System Reference Guide
.
Other LED codes indicate the presence (or absence) of different standby states, or errors.
A guide to the Summit WM3400 wireless LAN controller LEDs codes is provided in
Chapter 3, LED Codes
.
