Extreme Networks Summit Summit1i, Hardware Installation Manual

Page: 38 / 65

1-24 Summit Switch Hardware Installation Guide
Summit Switch Overview
Summit7i Switch Rear View
Figure 1-15 shows the rear view for the Summit7i switch.
Figure 1-15: Summit7i switch rear view
Power Sockets
The Summit7i switch supports up to two power supplies. Each power supply has its
own power socket. When a second power supply is installed, both provide a redundant,
load-shared power source to the Summit7i switch. If one of the power sources fails, the
second power supply takes over, ensuring uninterrupted network operation.
Note: Summit7i switch power supplies must only be serviced by personnel
trained by Extreme Networks.
Serial Number
The serial number is used for fault-reporting purposes.
MAC Address
This label shows the unique Ethernet MAC address assigned to this device.
Power socket
EW_S7iRr
Power socket