Regulatory Information
Extreme Networks Wireless AP3825 Installation Guide
41
Conditions of use in the European Community
Some EU countries allow outdoor operation with limitations and restrictions, which are
described in this section. It is the responsibility of the end user to ensure operation in
accordance with these rules, frequencies, and transmitter power output. The Extreme
Networks Wireless AP3825 must not be operated until configured for the customer’s
geographic location.
CAUTION
The user or installer is responsible to ensure that the Extreme Networks
Wireless AP3825 is operated according to channel limitations, indoor / outdoor
restrictions, license requirements, and within power level limits for the current
country of operation. A configuration utility has been provided with the
Wireless AP to allow the end user to check the configuration and make
necessary configuration changes to ensure proper operation in accordance with
the spectrum usage rules for compliance with the European R&TTE directive
1999/5/EC.
CAUTION
Please follow the instructions in this user guide to configure the Extreme
Networks Wireless AP3825.
•
Each Wireless AP is configured with a default group of settings. There is the
ability to change these settings. The user or installer is responsible to ensure
that each Extreme Networks Wireless AP3825 is configured properly.
•
The software within the Wireless AP automatically limits the allowable
channels and output power determined by the selected country code.
Selecting the incorrect country of operation or misidentifying the antenna
being used,may result in illegal operation and may cause harmful
interference to other systems.
•
This device employs a radar detection feature required for European
Community operation in the 5 GHz band. This feature is automatically
enabled when the country of operation is correctly configured for any
European Community country. The presence of nearby radar operation may
result in temporary interruption of operation of this device. The radar
detection feature will automatically restart operation on a channel free of
radar.
•
The 5150- 5350 MHz band, channels 36, 40, 44, 48, 52, 56, 60, or 64, are
restricted to indoor use only.
•
The 2.4 GHz band, channels 1 - 13, may be used for indoor use but there may
be some channel restrictions.