Figure 102: VX-RPS-1000 Front Panel
1 = Captive screws
3 = Connector to port extender
2 = Status LEDs
4 = AC power input connector
Table 38: VX-RPS-1000 LED Status Definitions
LED
LED Color
Status
AC OK
Green
AC input within operational range
Off
No AC voltage or AC voltage is outside the operational range
DC OK
Green
DC input within operational range
Off
No DC voltage or DC voltage is outside the operational range
For technical specifications, including pin locations and functions, see
Supply Technical Specifications
Replaceable Internal Power Supplies
Several ExtremeSwitching switch models have two bays for installing one or two replaceable AC or DC
power supplies.
In a redundant power configuration, both power supplies are fully fault-tolerant and load-sharing. You
can remove one power supply without interrupting switch operation.
Specific switch series and models are compatible with different power supply models, as shown in the
following table:
Power Supplies for Use with Your Switch
ExtremeSwitching and Summit Switches: Hardware Installation Guide
104
