Extreme Networks ExtremeSwitching SLX 9140, Hardware Installation Manual

Page: 14 / 90

4 ExtremeSwitching SLX 9140 Hardware Installation Guide
9036857-00 Rev AA
Port-side view of the SLX 9140 switch
Port-side view of the SLX 9140 switch
Figure 1 shows the front view of the SLX 9140 switch.
FIGURE 1 Front view of the SLX 9140 switch
Nonport-side view of the SLX 9140 switch
Figure 2 shows the rear view of the SLX 9140 switch.
FIGURE 2 Rear view of the SLX 9140
Device management options
You can use the management functions built into the switch to monitor the port status, physical status, and other information to help you
analyze device performance and system debugging. The switch automatically performs power-on self-test (POST) each time it is turned
on.
You can manage the switch using any of the management options listed in the following table.
1 10/100/1000Base-T RJ-45 management port 4 USB port (for flash drive)
2 SFP28 ports 1- 48 5 Mini-USB console port
3 QSFP28 ports 49- 54 6 System LEDs
1 Power supply unit 1 3 Power supply unit 2
2 Fans 1-6
TABLE 1 Management options for the switch
Management tool Out-of-band support In-band support Reference documents
Command line interface (CLI) Ethernet or serial connection N/A
Extreme SLX-OS Command Reference
for the
SLX 9140 and 9240 switches
REST or NETCONF/YANG APIs. Ethernet connection Yes
Extreme SLX-OS Management Configuration
Guide
for the SLX 9140 and 9240 switches
Standard SNMP applications Ethernet or serial connection N/A
Extreme SLX-OS Management Configuration
Guide
for the SLX 9140 and 9240 switches