Table 5: E3120 box contents (continued)
Quantity
Item
1
Front panel bezel
1
Rail kit installation instruction sheet
Note
The power cord needs to be purchased separately for the respective deployment country.
It can be ordered at
https://www.extremenetworks.com/powercords
2 Perform a visual inspection of the appliance for any physical damage. Contact
if there is any damage.
Attaching the Front Bezel
The appliance comes with an optional front panel bezel, which can be attached to the front of the
chassis by snapping it on the rack handles. A key lock allows you to lock the bezel in place to restrict
access to the controls on the front panel. You can monitor the system status indicators with the bezel in
place.
1 Lock the right end of the front bezel to the rack handle (
).
2 Push the front bezel until the left end clicks into place (
).
Figure 1: Attaching the front bezel
3 Lock the bezel, if needed.
Power Supply Options
You have the option to install, remove, and replace a power supply on the E3120 appliance. The E3120
appliance ships with one power supply and it comes installed. Additional redundant power supplies can
be purchased separately (ordering part number, 30527 WS-PSI-1100W-01).
Hardware Installation
ExtremeCloud™ Appliance E3120
12
