manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual, Page: 23 / 219

Share
Download
Extreme Networks ExtremeCloud Appliance E1120 User Manual Download Page 23

Filter data by radio band on each chart, individually. Click to show radio band filters on each chart. Then
select the 2.4GHz or 5GHz radio button to display data for that band.

Note
The datasets are sampled at different intervals. Therefore, it is possible that data from the 14-
day dataset will not include data from the 3-day dataset or from the 3-hour dataset. It is
possible that a new client will not appear in a dataset if the dataset has not been recently
updated.

Figure 5: Main Dashboard

Related Links

Adding a New Dashboard

 on page 23

Modifying a Dashboard

 on page 24

Understanding Date and Time

 on page 20

Availability Link Status

 on page 26

Adding a New Dashboard

Create additional dashboards to organize network data.

Dashboard

ExtremeCloud Appliance User Guide for version 4.36.03

23

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments