manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual, Page: 206 / 219

Share
Download
Extreme Networks ExtremeCloud Appliance E1120 User Manual Download Page 206

ExtremeCloud Appliance Applications

ExtremeCloud Appliance operates as the base operating system for container applications that will
share its resources.

ExtremeCloud Appliance supports container applications that offer custom solutions for network
management. Applications are installed as .Docker files available on Extreme Networks support site or
downloaded from the 

Docker hub

.

Related Links

Installing Applications

 on page 206

Upgrading an Application

 on page 208

Uninstalling an Application

 on page 209

Application Details

 on page 209

Extreme Defender for IoT

 on page 210

Installing Applications

Before you can install a container application, create a configuration template. For more information,
see 

Configuration Template Details

 on page 207.

Note
ExtremeCloud Appliance supports installation of a Docker file with a specific numerical
version. Applications indicating the 

"Latest Version"

 or version numbers that include

alphabetic characters are not supported. Twenty percent of the appliance hardware capacity
is allocated for Docker file applications.

Take the following steps to install an application:

1 Go to 

Admin

 > 

Applications

.

2 Click 

Add

 to create the 

Configuration Template

.

3 Click   to add an application to ExtremeCloud Appliance.
4 Install from a local 

File

 or docker hub 

Registry

.

5 Click 

Upload

, select the Defender docker file, and click 

Open

.

6 Click 

OK

.

The application is uploaded and installed on ExtremeCloud Appliance.

7 Click   to start the application.

The following describes the available application actions:

•

 — Install new application.

•

 — Edit Configuration Template.

•

 — Upgrade existing application.

•

 — Uninstall application.

•

 — Start application.

•

 — Stop application.

•

 — Show application statistics. Displays dashboard widgets, configuration details, and logs, and

it provides console access to the application for troubleshooting.

Related Links

Administration

ExtremeCloud Appliance User Guide for version 4.36.03

206

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments