manualshive.com logo in svg

Extreme Networks Extreme Wireless, Site Preparation And Installation Manual, Page: 140 / 147

Share
Download
Extreme Networks Extreme Wireless Site Preparation And Installation Manual Download Page 140

5

 

Accessory Specifications

Low-Loss Antenna Cables
Terminator: WS-CAB-RPSMATERM
Terminator: WS-CAB-NTERM
Attenuators
Extension Bracket: 30515 (WS-MB-WALLEXT01)

This section lists the specifications for cables, terminators, attenuators, and extension brackets.

Low-Loss Antenna Cables

This section outlines the outdoor and indoor optional antenna cables available for use with the
antennas. The cables that support the Wave 2 antennas are optional. The Wave 2 antennas can be
mounted without the use of cables.

Related Links

Outdoor Antenna Cables with Standard N-Type Plug and Jack Connectors

 on page 140

Indoor Antenna Cables with Reverse Polarity SMA-Type Connectors

 on page 141

Outdoor Antenna Cables with Standard N-Type Plug and Jack Connectors

The outdoor cables used with the Wave 2 antennas use a Type-N Plug and Type-N Jack; therefore, the
part numbers end with "N". Specifications for each cable are listed under the base cable.

Note
The Wave 2 antennas can be mounted outside without the use of cables. If using optional
cables, carefully determine the distance between the locations where you intend to mount the
ExtremeWireless AP and the outdoor antenna, to ensure that you order the right cable length.
The low-loss, outdoor, watertight cable is available in standard lengths.

Table 49: Outdoor Antenna Cables with Standard N-Type Plug and Jack Connectors

Cable

Refer To

20 feet (6.1 meters) PFP240 cable (WS-CAB-
L200C20N)

Table 51

 on page 141

6 feet (1.83 meters) PFP400 cable (WS-CAB-
L400C06N)

Table 52

 on page 142

20 feet (6.1 meters) PFP400 cable (WS-CAB-
L400C20N)

Table 52

 on page 142

50 feet (15.24 meters) PFP400 cable (WS-CAB-
L400C50N)

Table 52

 on page 142

ExtremeWireless™ External Antenna with Wave 2

140

Summary of Contents for Extreme Wireless




















































































































































Reviews:

No comments