Extreme Networks EAS 100-24t Switch, Hardware Installation Manual

Page: 23 / 40

Extreme Networks EAS 100-24t Switch Hardware Installation Manual
23
C H A P T E R
4
Introduction to
Switch Management
Management Options
This system may be managed out-of-band through the console port on the front panel or in-band using
Telnet. The user may also choose the Web-based management, accessible through a web browser.
Web-based Management Interface
After you have successfully installed the switch, you can configure the switch, monitor the LED panel,
and display statistics graphically using a Web browser, such as Firefox, Microsoft® Internet Explorer
(version 6.0), Mozilla, or Netscape Navigator (version 6.2.3 and later).
SNMP-Based Management
You can manage the switch with an SNMP-compatible console program. The switch supports SNMP
version 1.0, version 2.0 and version 3.0. The SNMP agent decodes the incoming SNMP messages and
responds to requests with MIB objects stored in the database. The SNMP agent updates the MIB objects
to generate statistics and counters.
Connecting the Console Port (RS-232 DCE)
The switch provides an RS-232 serial port that enables a connection to a computer or terminal for
monitoring and configuring the switch. This port is a female DB-9 connector, implemented as a data
terminal equipment (DTE) connection.
To use the console port, you need the following equipment:
●
A terminal or a computer with both a serial port and the ability to emulate a terminal.
●
A null modem or crossover RS-232 cable with a female DB-9 connector for the console port on the
switch.