Extreme Networks BlackDiamond 6800, Installation And User Manual

Page: 95 / 110

Asynchronous Transfer Mode (ATM) Module Installation and User Guide A-3
Changed Commands
Changed Commands
Changes to existing ExtremeWare commands fall into two categories:
• Syntax enhancements to support the ATM module
• Implementation changes to support the ATM module
Syntax changes are visible: keywords or arguments may have been added or changed to
make it possible to configure the behavior associated with the ATM module.
Implementation changes may be visible, taking the form of different input behavior,
such as blocking an attempt at specifying an ATM port for a given command, or in
additional information in the results of a command, such as in a
show ports
command.
Commands not described in this section are supported by the ATM module as
described in the ExtremeWare Software User Guide.
config sonet threshold signal degrade
<error_rate> ports <portlist> Configures the Signal Degrade threshold for the
specified ATM ports.
config sonet threshold signal fail <error_rate>
ports <portlist> Configures the Signal Failure threshold for the
specified ATM ports.
config sonet trace path <id_string>
ports <portlist> Configures the Path Trace Identifier string for the
specified ATM ports.
config sonet trace section [<id_byte> |
string <id_string>] ports <portlist> Configures the Section Trace Identifier for the
specified ATM ports.
show atm {<portlist>} Displays ATM port status
show atm pvc [<vpi | vci> | all] {vlan
<name>} {<portlist>} Displays PVC status.
show sonet {<portlist>} {detail} Displays the status of SONET features on ATM
ports.
unconfig diffserv dscp-mapping
ports <portlist> Resets the DSCP mapping tables for the
specified ATM ports to their default values.
unconfig atm ports <portlist> Resets the configuration parameters of the
specified ATM port to their default values.
unconfig sonet ports <portlist> Resets the SONET configuration parameters of
the specified ATM port to their default values.
Table A-1: New ExtremeWare Commands (continued)
Command Description