Extreme Networks BlackDiamond 6800 MPLS, Installation And User Manual

Page: 71 / 176

MPLS Module Installation and User Guide 4-9
Configuring LDP
The default values are as follows :
• ldp hello <hold_time> – 15
• targeted-ldp hello <hold_time> – 45
• ldp hello <interval_time> – 5
• targeted-ldp hello <interval_time> – 15
• ldp keep-alive <hold_time> – 40
•
targeted-ldp keep-alive <hold_time> – 60
• ldp keep-alive <interval_time> – 13
• targeted-ldp keep-alive <interval_time> – 20
This command can only be executed when MPLS is disabled.
Restoring LDP Session Timers
To restore the default values for LDP session timers, use the following command:
unconfig mpls
This command can only be executed when MPLS is disabled.
Displaying LDP Peer Information
To display MPLS LDP peer information, use the following command:
show mpls ldp {<ipaddress>} {detail}
This command displays information about the status of LDP peers. Summary
information is displayed for all known LDP peers and LDP peer sessions. If you specify
the
<ipaddress>
of the LDP peer, information for a single LDP peer is displayed. To
display additional information in the comprehensive detailed format, use the
detail
keyword.
By default the information displayed includes:
• Peer type (targeted or not targeted)
• Peer sessions
• Peer state
• Uptime