This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.
This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or
death, and extensive damage to equipment.
This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury.
The following table lists the safety precautions you should follow when installing your AP460C devices.
Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices
and to ensure that they are properly grounded and meet applicable local and national electrical codes.
These devices are intended for indoor use only.
Warning
: This is a Class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
Do not install the device in an environment where the operating ambient temperature might exceed the recom-
mended ranges.
For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selec-
tion of other channels is not possible.
Changes or modifications made to this device that are not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment.
Use only attachments and accessories specified by Extreme Networks.
These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental cap-
abilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the
devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play
with the devices.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when elec-
tronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-pre-
vention procedures when handling electronic components and equipment.
During operation, the surfaces of the AP460C device can become hot. Use caution when handling.
To
meet
federal
radiation
exposure
requirements,
these
devices
should
be
installed
at
a minimum
distance
of
1
2
"
(
30
cm)
from
people
or
animals.
Install the AP
The following sections describe how to mount your AP in an outdoor location on a pole or flat surface.
Shipping Carton Contents
The AP460C shipping cartons contain the following items:
l
AP460C chassis with two installed M20 cable gland assemblies and plugs, two installed M25 seal caps.
l
Hardware bag containing grounding hardware (M4 screw, split washer, and lock washer)
l
Read Me card.
AP60C Hardware Guide
2
AP460C Hardware Guide
2
To meet Canadian radiation exposure requirements, these devices should be installed at aminimum distance of
14" (35 cm) from people or animals.