24
Power supply
▪
The remote is powered by two AA alkaline
batteries.
Battery replacement
▪
Remove the battery door cover.
▪
Insert the battery according to polarity and
replace the battery door.
Remote operation
▪
Ensure the instrument is turned on and the
laser head is rotating.
▪
Press the power button to turn on the
remote control.
▪
Press the speed control button to increase
or decrease the speed of the laser head
rotation. The RPM will be displayed on the
LCD screen.
▪
To focus the laser beam between two
points press the scanning mode button.
Pressing the button multiple times will
adjust the angle of the beam as displayed
on the LCD screen.
▪
Press the clockwise or counter clockwise
button to change the rotation of the laser
head while the instrument is in scan mode.
▪
To set up a dial-in grade / slope refer to
page 22.
▪
To set up a manual grade / slope refer to
page 23.
USING YOUR REMOTE
