8
2. Remove the covering over the slot for the aileron horn on the bottom of the aileron with a sharp hobby
blade. Make sure you are doing this on the bottom of the aileron! Insert the horn into the base plate and
into the slot in the aileron. Use a fine tipped felt marker to trace the base plate. Use a sharp blade to
remove the covering under the base plate. Scuff the control horn's gluing surface with sandpaper and
glue the horn and baseplate in place with medium CA.
3. Attach a 6" servo extension to your aileron servo and secure with an Extreme Flight Servo Safety Clip
or a piece of heat shrink tubing. Secure the servo into the slot with the output spline facing the leading
edge of the wing. Assemble and install the aileron linkage as shown in the picture using the provided
2mm hardware. Please note the ball link and pushrod are mounted to the bottom of the servo arm.
