41
English
Safety Precautions
Time to Replace the Lamp
(continue)
Push the lamp cover to the arrow direction to remove it
from the projector.
Loosen the two screws with a (+) screwdriver.
Remove the lamp unit.
Hold the handles at both sides of the lamp and pull it up to
remove from the projector.
Insert the new lamp unit fully in.
Hold the lamp using the same method used for removal and push
into the replacement point inside the projector.
Then, tighten the tow screws.
Push back the lamp cover to the arrow direction until you can
hear a click sound.
Miscellaneous
Do not touch the glass surface of the lamp directly
with your hand. Wear the gloves.