Right Side spoke installing / replacing.
1) Insert two 5mm hex wrench into both axle-ends and
unscrew Right-Axle-End.
2) Replace insert spokes.
3) Reassemble all parts. Tighten Right-Axle-End at 7Nm
4) Check preload tuning.
Wheelbuilder’s manual
Dimension for wheel building
Spoke hole Ø: 2.5mm
Right flange drilling Ø: 47mm
Disc flange drilling Ø: 25mm
Center to right flange: 41mm
Center to disc flange: 25mm
Lacing
See www.extralite.com to find pre-calculated spoke lenghts.
Respect 24h lacing pattern (see drawing).
Micro Tuner
Right Axle End
Warning: Micro-Tuner must be
on left side of the bicycle.
Left Axle End
24H Lacing Pattern
Extralite products are warranted against defects in materials and/or workmanship for a period of two years from original date of purchase to the original o w n e r o n l y.
Any Extralite product that is returned and found by Studio Riva to be defective in materials and/or workmanship will be repaired or replaced at the sole discrection of Studio Riva. This warranty is
the sole and exclusive remedy. Studio Riva shall not be held liable for any indirect, special or consequential damages. The warranty is expressly limited to repair or replacement of the product
that has been returned and found to be defective by Studio Riva and are the sole remedy of the warranty. No credits or refunds will be issued.
The warranty does not cover: normal wear, tear and fatigue; damage or failure due to accident or collision. Improper assembling, poor maintenance, alterations or modifications, installation of
parts not compatible with Extralite products void this warranty. Warranty does not cover damage arising from crash, abuse and/or misuse or any other circumstances in which the product had
been subjected to forces or loads beyond its design. Immediatly replace the component after crash and violent shock, or after continuos heavy use.Improper use, modification and/or part
changing, including surface finishing, could irreparably damage the component. All labor charges for warranty service are responsability of the product owner.
INSTALLATION WARNING: Extralite components are extremely performing and lightweight, crafted with very high quality, they request adeguate installation and maintenance care. We strongly
recommended that a professional bike shop install and service your Extralite components. Improper assembly and/or adjustement may significantly compromise strength and durability of the
component causing serious personal injury. Carefully check proper tightening torque of every bolt. Always respect installation recommendations. Extralite components are designed for a
specific use X-Country or Road or Downhill, respect product specific destinaiton. Note: the rider assumes all the risks regarding use and installation of Extralite components.
Extralite Limited Warranty
Spoke tension:
Hub maximum spoke tension:
Disc Side /- 10Kgf.
Right Side 70Kgf +/- 10Kgf.
Reduce tension if the rim manufacturer reccomends a
lower value.
