ExtraHop 72 TB ESU, Quick Start Manual

Page: 3 / 3

Add storage capacity to the ExtraHop Trace appliance 3
Validate the configuration
1. Power on the Trace appliance.
2. Log into the Admin UI.
3. In the Appliance Settings section, click
Disks .
4. Confirm that all drives in the Drive Map section are colored green, indicating they are healthy. If any disk
is unhealthy, contact ExtraHop Support .
5. At the bottom of the Disks page, click External Packetstore Disks .
6. In the RAID Info section for the extended storage unit, click Attach , and then click OK .
7. After the configuration is complete, confirm that all drives in the extended storage unit are colored green,
indicating they are healthy. If any disk is unhealthy, contact ExtraHop Support .
8. Repeat steps 6 and 7 for any additional extended storage units.