Extraflame LUCIA PLUS, User Manual, Page: 27 / 40

27 ENGLISH
Wi-Fi enABLing conTroLs proceDure
Š
press key 6.
Š
press key 3 until SETTINgS appears and confirm by pressing key 6.
Š
Keep pressing key 3 until Wi-Fi appears and confirm by pressing key 6.
Š press key 6 to access
ENABLINg
.
Š
use keys 4-5 to select enabling "on"/ disabling "oFF" and press key 6 to confirm.
Š
press key 1 several times to exit the menu.
FIRST LOAD
This function allows the auger to be filled, thus facilitating first stove ignition phases, or in the event the pellet hopper is empty. With the
stove cold and "oFF", make sure the pellets have been introduced inside the hopper and activate the FIRST LOAD function, confirming by
pressing oK.
To interrupt continuous loading, simply press key 1 for 3 seconds.
conTroLs proceDure
Š press key 6.
Š
press key 3 until SETTINgS appears and confirm by pressing key 6.
Š
Keep pressing key 3 until FIRST LOAD appears and confirm by pressing key 6.
Š
use keys 4-5 for enabling “on” or disabling “oFF”.
Š
press key 1 several times to confirm and exit the menu.
ADDITIONAL THERmOSTAT
N.B. : INSTALLATION mUST BE PERfORmED BY AN AUTHORISED TECHNICIAN
it is possible to control the temperature of a room adjacent to the room where the stove is positioned (it is advisable to place the optional
mechanical thermostat at a height off the ground equal to 1.50 m). stove operation with the external thermostat connected in the TA clamp
may differ depending on whether or not the sTAnD-BY function is enabled.
DELTA T
This function allows you to set the hysteresis to switch the stove on and off DELTA T , used as a room temperature adjustment interval if not
managed by an external thermostat. The exact temperature for ignition is SET THERMOSTAT - DELTA T
.
The temperature for switch-off is SET
THER DELTA T .
The possible values for DELTA T go from: 0.5 - 5°C
conTroLs proceDure
Š press 6.
Š press 3 until SETTINgS appears and confirm by pressing 6
Š
press 3 until DELTA T appears and confirm by pressing 6.
Š
use keys 4 -5 to set the desired value.
Š
press 6 to confirm or 1 to return to the previous menus to the initial state.
wI-fI
The display allows internet connection using Wi-Fi technology.
This allows remote management and control of the stove using the dedicated App for smartphones,
“ TotalControl 2.0 ” (Apple store / play store).
The
Wi-Fi
network can be configured directly from the display using the following procedure (home network
configuration).
ATTENTION DOwNLOAD:
"TOTAL CONTROL 2.0" APP
conTroLs proceDure To reseT Wi-Fi conFigurATion AnD enABLe Access poinT
Š
press key 6.
Š
press key 3 until SETTINgS appears and confirm by pressing key 6.
Š
press key 3 until Wi-Fi appears and confirm by pressing key 6.
Š press key 3 until
RESET
appears and the press key 6.
Š
use keys 4-5 to select start reset “on” / “oFF” and press key 6 to confirm.
Š
press key 1 several times to exit the menu.