manualshive.com logo in svg

Extraflame DEBBY, User Manual

Share
Download
Extraflame DEBBY User Manual Download Page 18

2

3

1

4

5

6

7

8

18

ENGLISH

characterIstIcs OF the handheld deVIce

1.

DISpLAy

2.

SeT poWer/ scroll across in menus / increase - select a setting

3.

SeT ThermoSTAT room/ scroll across in menus / decrease - deselect a setting

4.

Back key

5.

Key to access menu and ConFIrm 

6.

on/off stove or restore from sleep mode.

7.

Serial cable input

8.

Battery compartment

 

Š

The handheld device is fitted with an LCD backlit display. The display remains lit for 5 seconds. After a certain period of time, in order to 

minimise battery consumption, the display turns off (sleep mode).

 

Š

It turns on again after pressing the on/oFF key (6).

 

Š

caUtIOn!

 

Š

Do not place the handheld device in direct or indirect contact with water. The handheld device may not work properly in the presence 

of humidity or if exposed to water.

FreQuenCy BAnDS

mAXImum poWer TrAnSmITTeD

868.3 MHz

4 mW ERP

869.85 MHz

4 mW ERP

Summary of Contents for DEBBY





































Reviews:

No comments

Brands by name

Popular brands

Load more brands