KETTLE CONNECTION AND PLUGS
The power connection was designed to secure effortlessly
and for easy disconnect when it’s time to collect your
beautifully crafted oil from the kettle.
LID HOLSTER
On the back of EtOH PRO there is a sturdy holster to
hold the lid when it’s not in action. This reduces the
overall operational footprint and makes handling the
bulky lid simple. The holster ships unattached, but is
easy to connect with the preset screws on the backside of
the unit and keyhole attachment points on the holster.
RECLAIM CONTAINMENT & HOLSTER
Handling reclaimed ethanol can be cumbersome, messy
and dangerous, so while our solution looks simple, it’s
amazingly convenient and useful. The custom lid is
designed to work with wide mouth Ball jars and use
should be limited to these jars. Using other glass jars can
result in dangerous structural failure. The holster should
always be used to protect the reclaim jar during use. You
will notice a bulbous shaped plastic valve at the end of the
long tube that goes into the reclaim jar, this is a backflow
device that prevents alcohol from being sucked from the
reclaim jar, back through the system, and back into the
kettle with the vacuum is broken by stopping the
machine. If this ever becomes disengaged, make sure it is
reinstalled and in working order before using.
SPIT JAR
It is important to attach the spit jar for collection
of any ethanol expelled by the pumps and spit out
of the vent tubing. It is designed for ease of use
and accessibility. The spit jar must be empty
every time the machine is started for operation
every time the machine is started.
