29
28
EN
EN
V. Charging the lamp
•
ATTENTION
y
Prior to charging the lamp, use the control buttons to turn off the LED light and
the insect killer since charging the battery during operation reduces its lifetime.
•
ATTENTION
y
Only charge the product using the prescribed charging method (via a USB port
5 V /1A) in the temperature range of 5-40°C. Using a different charging source
may cause a fire or explosion as a result of inappropriate charging parameters.
Charging at an ambient temperature above 40°C may result in a fire or explosion
since heat is generate during the charging process.
1. Take the cover marked „INPUT“ off the USB socket and insert the micro-USB
connector of the supplied cable into it.
2. Insert the connector of the USB cable into a USB port on a computer, powerbank
or USB power adapter.
•
ATTENTION
y
Charge the lamp in a vehicle when the car is running, i.e. while the
car‘s engine is running, to prevent the car battery from becoming
discharged.
y
The charging process is indicated by a lit red indicator light. When
charged, the indicator light is lit green.
3. After charging the lamp, disconnect the USB cable from the lamp and the USB
socket of the power source, and properly seat the rubber cover marked „INPUT“
on to it.
•
ATTENTION
y
Properly seating the cover of the charging connector (sealing the
connector) is essential for using the lamp in the rain and for washing
it under running water.
II. Technical specifications
Model/order number
43131
Parameters of the built-in battery
3.7 V /2000 mAh/Li- polymer
Charging method and charging parameters of the lamp USB / 5 V /1A
Charging time until fully charged
approx. 3 hours
Lighting time of the LED light (without the insect killer light) 100% ≥ 180 lm; ≥ 4 hours
50% ≥ 90 lm; ≥8 hours
20% ≥30 lm; ≥20 hours
Colour temperature of the LED light
6000-6500 K
Parameters of the insect killer
UV light wavelength of the insect killer
360-400 nm
Lighting time of the insect killer (without the LED light) ≥ 15 hours
Note:
The specified lighting times apply for a fully charged battery.
III. Turning the LED light on and off
•
ATTENTION
y
Before turning on the LED light, ensure that the lamp is not being charged since
this reduces the lifetime of the battery. To turn on the light, press the button with
the symbol
. Repeatedly pressing this button toggles the light intensities
100%/50%/20%. Pressing the button for the fourth time turns of the LED light.
IV. Turning the insect killer on and off
•
ATTENTION
y
Before turning on the insect killer, ensure that the lamp is not being charged
since this reduces the lifetime of the battery.
y
The insect killer is controlled using an independent button marked with the
symbol
and can be controlled independently of the LED light.
y
To turn on the insect killer, press the button
and press the same button to
turn it off.
