Harrier Flood Light
User Manual
4
Product Installation
Connector and wiring
This device comes with a built in male DT connector. If DT connector is not required, an
alternative option to support the connection is to cut the wire and hard wire it. See below
diagram.
Please note: Drawing is example only – wiring loom is not included.
FLOOD LIGHT
This device can be mounted in many orientations provided each individual device is secured by
the use of the correct mounting bracket.
Please refer to optional mounts section regarding specific mounting options.
IMPORTANT NOTE:
-
eXterrain does not take responsibility for ensuring the installation of these products
comply with your local regulations.
-
We recommend using a licensed auto electrician when installing this device.
-
Please ensure you follow the installation instructions carefully if you choose to install
this device independently.
