CFI EXTEL MOMBO - 12/2014
GB5
d. Connecting a single monitor
9WMRKSRIQSRMXSVXLI131&3STIVEXIWEWEWMRKPI[MVIHSSVGSRXVSP
8LIEHETXEXMSRXIVQMREPJMKMWGSRRIGXIHFILMRHXLIQSRMXSV
e. Connecting two monitors (fig. 7)
-JERI\XVEQSRMXSVMWEHHIHXLIEHETXEXMSRXIVQMREPJMKMWGSRRIGXIHXSXLIWIGSRHQSRMXSVERHVIQSZIH
from the first monitor (fig. 7)
2. Both monitors are identical
-RXLIIZIRXSJEGEPPJVSQXLISYXWMHIWXEXMSRXLISYXWMHIMQEKIWEVIWLS[RSRFSXLQSRMXSVWEXSRGI
-JSRISJXLIQSRMXSVWERW[IVWJMVWXXLISXLIVMWEYXSQEXMGEPP]WXSTTIHRSWSYRHVIGIMZIHRSMQEKIWVIGIMZIH
RSGSRZIVWEXMSRTSWWMFPI[MXLXLISYXWMHIEPPSTIRMRKGSRXVSPWEVIHIEGXMZEXIH
;MXLQSRMXSVWXLIMRXIVGSQMWTSWWMFPI
conversation between the two monitors)
f. Intercom scenario
E1SRMXSV12GEPPW1SRMXSV12YWMRKXLIMRXIVGSQFYXXSR
b. If there is no answer from MN2 after 30 seconds the call is ended
G8SGERGIPXLIGEPPFIJSVIXLIWIGSRHWEVIYTFIJSVI12ERW[IVWTVIWWXLIGSRZIVWEXMSRFYXXSR
H8SERW[IV12TVIWWIWXLIGSRZIVWEXMSRFYXXSR
e. The conversation lasts 30 seconds (no extended conversation)
J12SV12GERWXSTXLIGSRZIVWEXMSRF]TVIWWMRKXLIGSRZIVWEXMSRFYXXSR
g. It is not possible to use the door or gate opening controls when the intercom is active
h. The intercom between the two monitors can only be audio (impossible to have outside images when the inter-
com is being used)
M%GEPPJVSQXLISYXWMHIWXEXMSRLEWTVMSVMX]SZIVXLIMRXIVGSQHYVMRKYWISJXLIMRXIVGSQEGEPPJVSQXLISYXWMHI
station cuts the communication between the 2 monitors and the images from the outside station are shown on
both monitors
7.
TECHNICAL CHARACTERISTICS
a. Monitor (MN MOMBO)
6IJIVIRGI
4S[IVWYTTP]:
'SRWYQTXMSR;
7GVIIRGQ
6IWSPYXMSR<6+&
7M^IQQ\\
F4S[IVWYTTP]13(903&
1SHYPEVEHETXIV:b,^: %
c. Outside station (PL MOMBO)
6IJIVIRGI
'137GSPSYVGEQIVE8:0MRI
:MI[MRKERKPI
%HNYWXEFPIPIRW
7IRWMXMZMX]0Y\
;SVOMRKXIQTIVEXYVIETTVS\'XS'
4VSXIGXMSRMRHI\-4
7M^I[MXLWLMIPHQQ\\
