MN26T V4.0 05/05
4
1
2
5
6
3
4
7
10
9
8
Diode Test
Test current of 0.3mA maximum, open circuit voltage 1.5V DC
typical
Continuity Check
Audible signal will sound if the resistance is less than
approximately 30
Ω
, test current <0.7mA
Input Impedance
7.5M
Ω
(VDC and VAC)
Display
4000 count LCD
Overrange indication
“OL” is displayed
Polarity
Automatic (no indication for positive polarity); Minus (-) sign for
negative polarity.
Measurement Rate
2 times per second, nominal
Auto Power Off
Meter automatically shuts down after 15 minutes of inactivity
Low Battery Indication
“BAT”
is displayed
Batteries
Requires two AAA batteries
Fuses
mA,
µ
A ranges, 0.5A/250V fast blow
10A range, 10A/250V fast blow
Operating Temperature
32
o
F to 122
o
F (0
o
C to 50
o
C)
Storage Temperature
-4
o
F to 140
o
F (-20
o
C to 60
o
C)
Relative Humidity
<70% operating, <80% storage
Operating Altitude
7000ft (2000 meters) maximum.
Weight
9.17 oz. (260g).
Size
4.78” x 2.38” x 1.57” (121.5mm x 60.6mm x 40mm)
Safety
For indoor use and in accordance with Overvoltage Category
II, Pollution Degree 2. Category II includes local level,
appliance, portable equipment, etc., with transient
overvoltages less than Overvoltage Category III.
Meter Description
1. LCD
Display
2. Function
switch
3. Function
key
4. Range
key
5. Temperature
jack
6. COM
jack
7. 10A
jack
8. Positive
jack
9. Relative
key
10. Data Hold key
Note:
Tilt stand, fuse and battery compartment are on rear of unit.
