background image

HD600-EU-EN v1.3   07/13 

Introduction 

Congratulations on your purchase of the Extech HD600 Digital Sound Level Meter. 

This meter measures and displays sound pressure levels in dB (decibels) from 30 to 130dB in 
three measurement ranges. In addition to the LCD numerical displays, a bargraph is included for 
quick and easy viewing of sound level changes. Features include selectable Frequency Weighting 
(‘A’ and ‘C’), selectable Response Time (Fast and Slow), Max/Min Hold, and AC/DC analog 
outputs. PC cable and software enable the user to download and analyze measured data. This 
meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable 
service. 

 

 

Safety 

Read the following safety information carefully before attempting to operate or service the 
meter. Use the meter only as specified in this manual; otherwise, the protection provided by 
the meter may be impaired. 

 

Environmental Conditions 

 

Altitude up to 2000 meters 

 

Relative Humidity: 90% max 

 

Operating Temperature: 32 to 104°F (0 to 40°C 

 

Maintenance and Cleaning 

 

Servicing not covered in this manual should be performed by qualified personnel. 

 

Periodically wipe the case with a dry cloth. Do not use abrasives or solvents. 

 

 

 

Summary of Contents for HD600










Reviews: