Extech Instruments ExStik CL200 User Manual Download Page 9

 

Support line (781) 890-7440 

Technical support: Extension 200; E-mail: [email protected] 

Repair & Returns: Extension 210; E-mail: [email protected] 

Product specifications subject to change without notice

For the latest version of this User’s Guide, Software updates, and other 

up-to-the-minute product information, visit our website: www.extech.com

Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451 

Warranty

EXTECH INSTRUMENTS CORPORATION

 warrants this instrument to be free of defects 

in parts and workmanship for 

one year

 from date of shipment (a six month limited warranty 

applies to sensors and cables). If it should become necessary to return the instrument for 

service during or beyond the warranty period, contact the Customer Service Department at 

(781) 890-7440 ext. 210 for authorization or visit our website www.extech.com for contact 

information.  A  Return  Authorization  (RA)  number  must  be  issued  before  any  product  is 

returned to Extech. The sender is responsible for shipping charges, freight, insurance and 

proper  packaging  to  prevent  damage  in  transit.  This  warranty  does  not  apply  to  defects 

resulting  from  action  of  the  user  such  as  misuse,  improper  wiring,  operation  outside  of 

specification,  improper  maintenance  or  repair,  or  unauthorized  modification.  Extech 

specifically  disclaims  any  implied  warranties  or  merchantability  or  fitness  for  a  specific 

purpose and will not be liable for any direct, indirect, incidental or consequential damages. 

Extech's total liability is limited to repair or replacement of the product. The warranty set 

forth  above  is  inclusive  and  no  other  warranty,  whether  written  or  oral,  is  expressed  or 

implied. 

Calibration and Repair Services 

Extech offers repair and calibration services

 for the products we sell. Extech also 

provides NIST certification for most products. Call the Customer Service Department for 

information on calibration services available for this product. Extech recommends that 

annual calibrations be performed to verify meter performance and accuracy. 

Copyright 

©

 2005 Extech Instruments Corporation 

All rights reserved including the right of reproduction in whole or in part in any form. 

more info for 

Extech CL200

Phone: 01235 838 555

Email: [email protected]

Web: www.airconcern.co.uk

Air Concern Ltd, Building 173 Curie Avenue Harwell Didcot, Oxfordshire

Summary of Contents for ExStik CL200










Reviews: