Extech Instruments EX570 User Manual Download Page 18

EX570-ENG   V2.3  3/09 

18 

Warranty 

EXTECH INSTRUMENTS CORPORATION  (a FLIR company) warrants the basic 
instrument to be free of defects in parts and workmanship for three years from date of 
shipment (a six month limited warranty applies on sensors and cables). If it should become 
necessary to return the instrument for service during or beyond the warranty period, 
contact the Customer Service Department at (781) 890-7440 EXTENSION 210 for 
authorization or visit www.extech.com for more information. 

A Return Authorization (RA) 

number must be issued before any product is returned to Extech.

 The sender is 

responsible for shipping charges, freight, insurance and proper packaging to prevent 
damage in transit. This warranty does not apply to defects resulting from action of the user 
such as misuse, improper wiring, operation outside of specification, improper maintenance 
or repair, or unauthorized modification. Extech specifically disclaims any implied warranties 
or merchantability or fitness for a specific purpose and will not be liable for any direct, 
indirect, incidental or consequential 

 

Calibration and Repair Services 

Extech offers repair and calibration services for the products we sell. Extech also provides 
NIST certification for most products. Call the Customer Service Department for information 
on calibration services available for this product. Extech recommends that annual 
calibrations be performed to verify meter performance and accuracy. 

 
 

 

 

Support line (781) 890-7440 

Technical support: Extension 200; E-mail: [email protected] 

Repair & Returns: Extension 210; E-mail: [email protected] 

Product specifications subject to change without notice 

For the latest version of this User’s Guide, Software updates, and other 

up-to-the-minute product information, visit our website: www.extech.com 

Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451 

Byram 

Labs

Summary of Contents for EX570



















Reviews: