EX230-EU-EN-V1.2-09/10
14
Enclosure
Double molded
Diode Test
Test current of 0.9mA maximum, open circuit voltage 2.8V DC
typical
Continuity
Threshold 20 to 100
Ω
, test current <1.5mA
Input Impedance
10M
Ω
VDC/VAC
AC Response
Average responding
ACV Bandwidth
40Hz to 1000Hz
IR Spectral response
6 to 16µm
IR Emissivity
0.95 fixed
IR distance ratio
6:1
Laser pointer
Class 2 laser < 1mW power; Wavelength is 630 to 670nm
Display
4000 count backlit liquid crystal display
Overrange indication
“
OL
” is displayed
Auto Power Off
30 minutes (approximately)
Polarity
Automatic (no indication for positive); Minus (-) sign for negative
Measurement Rate
2 times per second, nominal
Battery
One 9 volt (NEDA 1604) battery
Fuses
mA, µA ranges; 500mA 250V ceramic fast blow
A range; 10A 600V ceramic fast blow
Operating Temperature
-10ºC to 40ºC (14ºF to 122ºF)
Storage Temperature
-10
o
C to 60
o
C (14
o
F to 140
o
F)
Operating Humidity
Max 80% up to 31ºC (87ºF) decreasing linearly to 50% at 40ºC
(104ºF)
Storage Humidity
<80%
Operating Altitude
2000 meters (7000 ft) maximum
Weight
260 g (9.17oz)
Size
147x76x42 mm (5.8x2.9x1.6”)
Safety
This meter is intended for origin of installation use and provides
user protection through double insulation per IEC/EN 61010-
1:2001 and IEC/EN 61010-031:2002 to Category III 600V;
Pollution Degree 2.
Approvals
CE, ETL
Copyright
©
2010 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form.
